Finding out how to measure for a hockey helmet is really difficult especially for new players. It is important to get the right size helmet for your head so that it is comfortable and provides the best protection possible. In order to size a helmet correctly, there are a few steps that need to be taken.

How to measure for a hockey helmet? 5 steps to correctly fitting a hockey helmet
This article, Adam Matter will answer this question as well as provide you general guide for choosing hockey helmet size. Now, let’s get started!
How to measure for a hockey helmet?

How to measure for a hockey helmet?
How should hockey helmet fit? Measuring for a hockey helmet is an important step in ensuring a proper and comfortable fit. The helmet should fit snugly without being too tight, so it is important to take accurate measurements.
There are a few different ways to measure for a hockey helmet. The following five steps will outline the different methods and help you choose the best measurement method for you.
Take a head measurement
Your head measurement is the first thing you’ll need to establish your size. To get the circumference, wrap a gentle tape measure around your head, slightly above your brows. Then, compare that number to the size range listed on the box of the helmet you’re contemplating to determine if you need a small, medium, or large helmet.
Adjust the helmet to the biggest setting
Using the system for adjusting the fit of the helmet so that it can accommodate the widest feasible head circumference. Make adjustments until the helmet is just tight enough to be comfortable, but does not bind or squeeze the skull.
Put and fasten the helmet
Place the helmet on your head, ensuring that the rim rests approximately one finger width above your eyebrows and that the occipital lock rests on the occipital bone at the back of your head. Fasten the helmet by fitting the chin strap snugly around your neck and fasten it in the front with the buckle.
Adding mask and chin strap
If you are using a fullface mask, put it on now. If you are using a chin strap only helmet, put the strap over your head and fasten it in the back.
Check the helmet’s fit
Now that the helmet is on your head, shake your head up and down and side to side while making affirmative and negative sounds. The helmet should not move independently on the head; it should fit snugly.
Assess the fit by repositioning the helmet with your hands and swaying your head side to side. It should not wiggle or exert an unpleasant amount of force. A proper fit should be snug on the head while remaining comfortable.
Goaltenders in ice hockey are the only players that are on the ice for the entire game. Their position exposes them to impacts from collisions with other players, falls to the ice, and puck impacts. In competitive ice hockey leagues, head injuries resulting from puck impacts have been reported with some cases resulting in ending the player’s career. Considerable research has been conducted to assess the performance of hockey helmets; however, few have assessed the performance of goaltenders’ masks.
As cited by: https://www.science.gov/
General guide for choosing hockey helmet size

General guide for choosing hockey helmet size
To calculate your hockey helmet size, measure the circumference of your head about ½”-1” above your eyebrows with a soft tape measure or a piece of cloth. This quantity in inches or millimeters corresponds closely to the size of your helmet. Typically, you can also use your hat size to determine the size of your helmet basing on the brand, such as:
Bauer helmet size
Bauer is a leading manufacturer of hockey helmets and provides a variety of sizing options to ensure you get the best fit for your head. To ensure the best fit and protection, it is important to get the right size helmet for your head. Here is a general guide for choosing a Bauer hockey helmet size.
First, measure your head circumference in inches. To do this, use a flexible tape measure and wrap it around the widest part of your head, just above the eyebrows.
Next, use the size chart provided by Bauer to determine which helmet size is most appropriate for your head measurement. Bauer provides size charts for both adult and youth helmets.
Helmet Size | Head Circumference | |
SM/M | 21.2 – 23.2″ | 54 – 59 cm |
M/L | 22.4 – 24.6″ | 57 – 62.5 cm |
Finally, it is important to try the helmet on before making a purchase. Make sure the helmet is snug but not too tight; it should not be uncomfortable or cause any pressure points. Additionally, it should not move when you shake your head.
CCM helmet size
When choosing a hockey helmet size for a CCM brand, it is important to measure the circumference of your head to get the best fit. To do this, use a soft measuring tape and wrap it around the widest part of your head, just above the eyebrows and ears. The measurement should be taken in centimeters. Once you have your measurements, you can compare them to the size guide provided by CCM. Generally, CCM helmets come in sizes below:
Size | Hat Size | Head Circumference |
Small | 61/2 – 71/8 | 52.5 – 57 cm |
Medium | 7 – 71/2 | 55.5 – 60 cm |
Large | 73/8 – 8 | 58.5 – 63 cm |
If your head measurement falls between two different sizes, it is recommended to choose the larger size. Additionally, you can also adjust the fit of the helmet with the help of the internal padding.
Warrior helmet size
Choosing the right size hockey helmet is essential for providing optimal protection and comfort while playing the game. When it comes to Warrior brand helmets, there are three sizes available: Small (S), Medium (M), and Large (L). To determine which size helmet is right for you, use a cloth tape measure and measure the circumference of your head, starting at the forehead and going just above the ears. In addition, you can use the size chart below
HELMET SIZE | HAT SIZE | HEAD CIRCUMFERENCE |
Small | 6’5/8 – 7 | 52 – 56 cm |
Medium | 7 – 7’3/8 | 56 – 59 cm |
Large | 7’1/8 – 7’3/4 | 57.5 – 62 cm |
Factors considering about hockey helmet

Factors considering about hockey helmet
Comfortable
You should always look for equipment that you can use without any discomfort. Although though the interior of most helmets is made of a protective foam, certain helmets are going to feel nicer than others. Examine how well different types of helmets fit you and how comfortable they are.
Color
The general color of the helmet is something that can be something to take into consideration as well, especially if you play for an organized league such as high school hockey or travel hockey. This is especially important if you play for an organized league.
The majority of the time, clubs like that will demand that all of their players wear helmets of the same color, so that everyone appears uniform. You are in luck because all of the major manufacturers of helmets, like as CCM, Warrior, and Bauer, have a wide selection of colors from which you can choose!
Protection
A hockey helmet should have a close fit in order to avoid any shifting and to provide the highest possible level of protection. Check that the chinstrap may be adjusted so that when it is attached, it will just lightly touch the area beneath the chin. You can be required by the regulations of hockey to wear a helmet that is certified by both the CSA and the HECC. Examine the regulations that you are playing by to see what the criteria are. A CSA or HECC certification label can be found on the inside of every helmet that has received one of these two certifications.
Brand
Several brands will each have their own style, fits, and features that they provide customers. Visit our website to learn more about the major helmet manufacturers and to choose which model of helmet would be the most suitable for your playing style and personal preferences.
How is a child hockey helmet sized?

How is a child hockey helmet sized?
Hockey helmet sizes change from manufacturer to manufacturer and even from model to model. One model from the same manufacturer has a different sizing guide than another.
The average youth has a smaller head circumference than an adult. Typically between 20.5″ to 23.5″ in length.
Choose the small and medium if the brand provides five different sizes. Whether you need a small or medium depends on the size of your head.
In addition, the most popular brand provides customers with the option between medium and large sizes. The small and medium sizes are a good fit for the heads of young people.
Tip to attach a visor to a hockey helmet

Tip to attach a visor to a hockey helmet
Attaching a visor to a hockey helmet is a great way to protect your eyes and face from potential injuries while playing hockey. Most hockey helmets come with a visor that can be easily adjusted to fit different faces.
To put the visor on your helmet, first make sure the chin strap is tight. Then, open the visor by pulling it out from the front of the helmet. Push it up and adjust it so that it is close to your face. Finally, make sure the strap is secure and push the visor back down into place.
To ensure the visor is securely attached, check that all of the screws are tightened. If any of the screws are loose, tighten them with a screwdriver. If the screws are too tight, loosen them slightly. Additionally, make sure that the visor is not obstructing your vision. If it is, adjust it until it is positioned correctly.
FAQs: How to measure for a hockey helmet?
How to measure hockey helmet size for 8 year old?
The next size up is a Small, which has an age restriction of 8–11 years and a head circumference range of 20.4–22.4 inches.
What criteria should I use to select a hockey helmet for my kid?
- The helmet that fits you the most comfortably will be the one that is the most suitable for you.
- Your head should be completely covered by the helmet, and it should be a snug fit.
- You should have a space equal to the width of one finger between the helmet and your eyebrows.
- Always ensure that the chin strap is fastened securely.
- It is important that the chin cup sits firmly and squarely on your chin.
What should the size of a hockey helmet be?
Check that the helmet’s rim is one finger width above the athlete’s brow and that the helmet lays flat on the top of the athlete’s head. A well-fitting cage or facemask should be no more than an inch from the athlete’s face. The chin cup should be snugly fitting and situated beneath the athlete’s chin.
Conclusion
In sum, you already know how to measure for a hockey helmet, so now it is time to learn how to fit a hockey helmet properly. In the end, let’s remember 5 steps to fit a hockey helmet accurately. Thanks for reading! If you have any questions, let’s contact hockeyheritage.org to answer!